Configurating the WAN with a Static IP Address
To configure the WAN using a static IP address, navigate to the WAN Settings tab. Select the option Configure Static IP, and then input the required network details as specified for your setup. Ensure all configurations align with your network requirements before saving the changes.
Configuring the WAN with PPPoE
To configure the WAN using PPPoE, go to the WAN Settings tab. Select the option Configure with PPPoE, and enter the necessary credentials, such as the username and password provided by your Internet Service Provider (ISP). Verify the settings and save the configuration to establish the connection.
Configuring VLAN on WAN
To configure a VLAN on the WAN, access the WAN Settings tab. Choose the Configure VLAN on WAN option. Enter the VLAN ID as required by your network setup. Confirm the details and save the configuration to enable VLAN functionality.
Configuring the WAN with DHCP
To configure the WAN using DHCP, navigate to the WAN Settings tab. Select the option Configure DHCP to enable automatic IP address assignment. The device will obtain the necessary network settings, such as IP address, subnet mask, gateway, and DNS, from the DHCP server. Save the configuration to apply the settings.
Configuring the WAN with a SIM
To configure the WAN using a SIM card, open the WAN Settings tab. Select Configure SIM, and insert the SIM card in the designated slot on the device and attach the antennas to the device. Save the settings to activate the SIM-based connection.
Rebooting the Device via the Console Page
The Console Page provides an option to reboot the device, allowing you to restart it without altering the current configuration. This can be useful for resolving minor issues or applying certain changes.
Resetting the Device via the Console Page
The Console Page includes an option to reset the device to its factory settings. This action will erase all custom configurations and restore the device to its default state.
