Ray Access Points & Wi-Fi

Articles relating to Ray Access Points & Wi-Fi

Ray Access Points & Wi-Fi

Changing Tx Power for a Specific Device or All Devices

SCENARIO : Increasing & Decreasing Tx Power Levels    CATEGORY : RF Tuning    PURPOSE / USE CASE : Adjust coverage or reduce interference    STEPS TO TEST : Increase/decrease...

How to change the Tx Power in Radio Profile

In Wi-Fi terminology, TX power refers to the transmit power of a wireless access point or router. This is the amount of power that...

How To Configure & Test Band Steering

SCENARIO: Configure & Test Band Steering CATEGORY: Optimization Purpose / Use Case: Push capable clients to 5 GHz for better performance   Steps to Test:...

Extending Network VLANs From Switch to RAY AP Wireless SSID

Bridging Network VLANs using Ray AP to Wi-Fi SSID:   In this Ray article, we are going to cover how to bridge VLANs on...

Dynamic VLAN on Ray Devices

Dynamic VLAN configuration in networking is a method where the VLAN to which a device belongs is determined dynamically based on certain parameters, typically...

WPA3-PSK (Static Key)

WPA3-PSK (Static Key) CATEGORY : Authentication Purpose / Use Case : Enhanced security with SAE (forward secrecy).   BREAKDOWN: WPA3: A security protocol that...

WPA2-PSK (Static Key)

SCENARIO : WPA2-PSK (Static Key)  CATEGORY : Authentication  PURPOSE / USE CASE : Simple shared key for controlled environments  STEPS TO TEST : Create SSID, set PSK, connect a client      WPA2-PSK (Static...

Advanced WLAN Settings

To hide your SSID Go to Advance tab under WLAN, select Hide SSID option.    

Open SSID Wi-Fi with Mac only authentication

SSID stands for Service Set Identifier, a unique name that identifies a wireless network. Devices use the SSID to connect to a specific network....

How to rename a SSID

SSID (Service Set Identifier) is the name given to a wireless network. It’s used to identify and connect devices to a specific network. When...