Ray Gateway, LAN/WAN & HA

Articles relating to Ray Gateway, LAN/WAN & HA

Ray Gateway, LAN/WAN & HA

How to configure PPPOE on ray Edge devices

PPPoE is a networking protocol that also offers essential networking features, like authentication, data encryption, and data compression. Because of that, PPPoE is one...

Ray Edge Micro 4G/5G Sim/Cellular WAN Configuration

      Configuring Ray Edge Micro 4G/5G sim slot for Wan:   In this article, we are going to demonstrate how to configure...

Configure failover using WAN+GSM interfaces

Failover is the process of automatically switching to a backup system or resource when the primary system fails. It ensures continuous operation and minimizes...

DNS Configuration Guide for Ray Device LAN Setup

The Domain Name System (DNS) is an essential service that enables the translation of domain names into IP addresses, allowing computers to locate each...

DHCP Lease Time: Overview and Configuration Guide

What is DHCP Lease Time? DHCP Lease Time is the amount of time a device (client) is allowed to use a specific IP address...

How to Configure NTP

NTP (Network Time Protocol) configuration is the process of setting up a system to synchronize its clock with a reliable time source, such as...

Configuration of SNMP

SNMP (Simple Network Management Protocol) is a protocol used for monitoring and managing network devices (like routers, switches, servers, and printers) in an IP...

Communication between two local networks

In General terms, Local networks are used to facilitate communication and resource sharing among devices in a specific location, making it easier for users...

High Availability (HA) Configuration Guide

1. Overview This document explains how to configure High Availability between two Ray Edge devices using VRRP. The main purpose is to provide gateway...

Ray in Mesh Mode (Bridge)

The Mesh mode can be setup in 2 Modes.  Bridge with the WAN and NAT/Gateway/Route Mode.    In this article, we shall explore the...