The LED status of an AP (Access Point) device refers to the current state of the LED lights on the device. These LED lights often indicate various statuses such as power, network activity, and connection status.
Checking the LED status of an AP device can help you determine if the device is functioning as expected or if there are any issues with its connectivity. This can be useful for troubleshooting network problems or diagnosing issues with the AP device itself.
RAY AP requires the AP to be connected to the Internet before it is set up.
R6A-C & R6-B-C APs
| LED Status | Status | Resolution |
| No Light |
No Power. |
Please check the power delivery via PoE or a compatible DC power supply. |
| Red LED | No IP Address Received |
The AP is not able to receive IP- addresses from the network. The best way to resolve this is by plugging the same network cable into the laptop and verifying the status. If you have a VLAN, Static IP, or PPPoE Network, Please refer to the below article. |
| Green LED | No Access to the Ray Cloud | The AP is not able to reach the Ray cloud. There could be a firewall blocking access to the cloud. Please refer to the below article. https://support.ray.life/en/support/solutions/articles/81000144888-network-requirements |
| Blue LED |
All Okay. |
Vega
| LED Status | Status | Resolution |
| No Light |
No Power. |
Please check the power delivery via PoE or a compatible DC power supply. |
| Fast Blinking Blue LED | No IP Address Received |
The AP is not able to receive IP- addresses from the network. The best way to resolve this is by plugging the same network cable into the laptop and verifying the status. If you have a VLAN, Static IP, or PPPoE Network, Please refer to the below article. |
| Slow Blinking LED | No Access to the Ray Cloud | The AP is not able to reach the Ray cloud. There could be a firewall blocking access to the cloud. Please refer to the below article. https://support.ray.life/en/support/solutions/articles/81000144888-network-requirements |
| Stable Blue LED | All Okay. |
Thank you,
Ray support Team
