Knowledge Base

Static Routing Configuration Guide

Last updated: Nov 17, 2026
Overview Static Routing allows administrators to manually define routes on a device to forward network traffic towards a specific destination network through...

Overview

Static Routing allows administrators to manually define routes on a device to forward network traffic towards a specific destination network through a designated gateway.

This configuration is useful when communication is required between different LAN networks, remote networks, or networks reachable through VPN connections.

This document explains how to create a Static Routing profile, configure the required routing parameters, save the configuration, publish it, and verify the route on a Ray device.

 

Configuration Steps Step 1: Navigate to Static Routing
  1. Log in to the Ray Cloud platform.
  2. From the top navigation menu, click Profiles.
  3. Navigate to the Routing section.
  4. Select the Static Routing tab.
  5. Click + Create Static Routing to create a new static routing profile.

 

Expected Result: The Static Routing configuration window will open.

 

Step 2: Create Static Routing Profile

After clicking + Create Static Routing, the Static Routing configuration window will open. Configure the following parameters:

Profile Details:

  • Profile Name: Enter a unique name for the static routing profile.
  • Description: Enter a brief description explaining the purpose of the routing configuration.
  • Definitions: Select the appropriate routing definition from the available options.
  • Enable Profile Overriding: Enable this option if profile-level overriding is required.
  • Disable Auto Publish: Enable this option if automatic publishing of the profile needs to be disabled.

 

General Setting:

  • Disable: Select this checkbox to disable the static route. Keep it unchecked when the route needs to be active.
  • Interface: Select the outgoing network interface through which traffic will be forwarded, such as the LAN interface.
  • Routing Type: Select the routing type. Choose Unicast for normal static routing.
  • Target: Enter the destination network address in CIDR notation. This identifies the remote network that needs to be reached.
  • Next Hop: Enter the gateway IP address through which the destination network can be reached.

 

Advance Setting:

  • Metric: Defines the route preference. A lower metric generally receives higher priority when multiple routes have the same destination prefix.
  • MTU: Specifies the Maximum Transmission Unit for the route.
  • Source: Specifies the source IP address for the route, if required.
  • On Link: Enable this option when the next-hop gateway should be treated as directly reachable through the selected interface.

Advanced parameters can generally be left at their default values unless specific network requirements apply.

 

Save Configuration:

  1. Enter the configuration details in the Remarks field. This field is mandatory.
  2. Review all configured profile details and routing parameters.
  3. Click Save to save the Static Routing profile.

Expected Result: The Static Routing profile will be created and saved successfully.

What are your feelings

🙂😐🙁